联合整地机:混茬,平整,合墒,一遍完成。
高效、高性能-格兰Enduro/Enduro Pro联合整地机。作业速度快,耕深均匀。
现代农场对联合整地的作业要求已经发生了变化。短暂的窗口期,需要高性能的设备。严格的轮作法规需要在技术上快速满足农场主的要求。格兰联合整地机适用性强,可适用于各种条件:
Enduro/Enduro Pro联合整地机采用3排深松齿结构,可确保充分的混茬和深松效果。 深松齿间距为285毫米(一体式机架),270/275毫米(折叠式机架)。齿臂离地间隙大,具有充分良好的通过性能。
Enduro Pro最大的工作深度为35厘米(Enduro 是30厘米),可配备320毫米翼型铲。可选配快速更换铲尖。 浅翻时,翼型铲可覆盖整个作业幅宽。每排齿间距750毫米。870毫米的离地间隙拥有优异的残茬通过能力,可耕作多种作物(玉米,向日葵,小麦,油菜等)。
技术参数 (Enduro)
机型 | Enduro 3000 | Enduro 3500 | Enduro 4000F | Enduro 4500F | Enduro 5000F |
工作幅宽(米) | 3.00 | 3.50 | 3.85 | 4.40 | 4.90 |
工作深度(米) | 5 - 30 | 5 - 30 | 5 - 30 | 5 - 30 | 5 - 30 |
深松齿数量 | 10 | 12 | 14 | 16 | 18 |
最小\最大配套动力(马力) | 90/240 | 110/270 | 130/300 | 150/325 | 170/350 |
技术参数 (Enduro Pro)
机型 | Enduro Pro 3000 | Enduro Pro 3500 | Enduro Pro 4000F | Enduro Pro 4500F | Enduro Pro 5000F |
工作幅宽(米) | 3.00 | 3.50 | 3.85 | 4.40 | 4.90 |
工作深度(米) | 5 - 35 | 5 - 35 | 5 - 35 | 5 - 35 | 5 - 35 |
深松齿数量 | 10 | 12 | 14 | 16 | 18 |
最小\最大配套动力(马力) | 90/240 | 110/270 | 130/300 | 150/325 | 170/350 |
The frame is a result of a long study made by FEM (Finite Element Method) calculation to optimise the steel over the working width and proposing a strong structure suitable for tractors up to 350hp.
The complete Enduro/Enduro Pro range has been designed to be combined with the heaviest rollers in the range. All the most aggressive scenarios (deep working when turning, headland turns, transport tests, ...) have been considered to make the different frames as strong as possible and thus guaranteeing the proven Kverneland quality.
For stony conditions and high Penetration - Triflex 700 & Shear-bolt Tines
The auto-reset Triflex tine uses the well-known Kverneland leaf spring system to ensure a high point pressure of 700kg and a smooth release curve in case the tine hits an obstacle. A shear-bolt protection tine is also available. Both hollow, specially heat-treated tines are of a narrow design with two working zones which reduce the pulling forces whilst ensuring a perfect penetration even in heavily compacted soil. It is the perfect choice for deep loosening and working on heavier soil types strewn with stones.
The Triflex 700 and shear-bolt tines can be equipped with different shares to adapt to varying working depths and tasks. Seven options of share design are available with the Knock-on® system. This is the easiest way of changing parts on a cultivator, necessary when adjusting the machine for the next job or when changing wearing parts.
Leaving an even surface
In order to create an even surface for a fine seedbed, Kverneland offers various options of levelling tools for the Enduro and Enduro Pro models. The levelling equipment is directly linked to the roller. If the working depth changes via the roller, the levelling equipment will stay at the same optimal levelling position thanks to the parallelogram on the Enduro Pro model.
Levelling tines are a very easy and economic way to handle normal straw conditions on light to medium soil types. When it comes to heavy amounts of residues and in soil conditions with clay or loam, the levelling discs are more suitable.
Both versions are overload protected by a spring or an elastic rubber buffer and mounted via a parallelogram (on Enduro Pro) to avoid damages in stony or other difficult conditions. Individual springs ensure the individual release of tines or discs and keep levelling quality even in stony conditions. The working angle of the levelling tines or discs can be adjusted in order to increase or decrease the aggressive position. The centralized levelling adjustment of the complete levelling device is easily done via adjusting handles.
To respect the transport width on the mounted versions with 3.00m and 3.50m working width, the outer tines or discs can be hydraulically or mechanically folded in.
A rear triple finger harrow (Enduro Pro) provides levelling and controls weed development by pulling the weeds out of the ground so that the roots dry out in the sun. This is particularly interesting with rhizome and other weeds that could start growing again if they are pressed by a packer immediately after cultivation. Gauge wheels control the working depth of the machine. The triple finger harrow can be adjusted by the setting angle and the hydraulic pressure via the parallelogram according to conditions.
A rear triple finger harrow (Enduro Pro and Turbo) provides levelling and controls weed development by pulling the weeds out of the ground so that the roots dry out in the sun.
This is particularly interesting with rhizome and other weeds that could start growing again if they are pressed by a packer immediately after cultivation. Gauge wheels control the working depth of the machine.
The triple finger harrow can be adjusted by the setting angle and the hydraulic pressure via the parallelogram according to conditions.
The roller on a cultivator is an elementary tool with different tasks:
The choice of the right roller depends on the soil type, soil condition, crop rotation and lifting capacity of the tractor.
Actipack ø560mm - 205 kg/m
Actiring ø540mm - 160 kg/m
Actiflex ø580mm - 160 kg/m
Actipress Twin ø560mm - 220kg/m (not on folding models)
Cage roller ø550mm - 90 kg/m
Double cage roller ø400mm (tube/flat) - 160 kg/m
User comfort is key - easy adjustment
Kverneland always focuses on safe operation and user comfort. With all the adjustments being done without the need for tools, a lot of precious time is saved!
Adjusting the Enduro and Enduro Pro is easily done. When setting the working depth of the tines, the parallelogram design allows the correct depth of the levelling discs to be maintained without adjustment in most conditions.
In addition, there is hardly any maintenance to be done apart from changing wearing parts.
The Enduro can simply be connected/disconnected from the tractor due to the easy hitch linkage. And this is even more comfortable with the hydraulic depth adjustment.